SGM VP Touring Power + Data Joiner

Description

SGM VP Touring Power + Data Joiner

Main features and specification for SGM VP Touring Power + Data Joiner:

• Intended to join power and data in one single VP cable
• Suitable for easy rigging via clamps or straps
• SGM Item no. 83062049

Physical

• Net dimensions: 104 x 54 x 77 mm
• Net dimensions inches: 4.1 x 2.1 x 3 inches

Electrical

• AC Power, nominal: 200 – 240V 50/60Hz
• Max power thru @ 230 V: 10 A

Connections

• Data / Power input: RJ45 connector IP66
• Data / Power output: 8 pin X-Lok connector IP68
• Power: Power input connector & link-thru

Thermal

• Temperature range, Operating: -20°C to 60°C
• Temperature range, Start-up: -20°C to 60°C
• Temperature range, Storage: -40°C to 80°C

Included items

• Mounting bracket (incl. screws)

The VP Touring Power + Data Joiner is designed to join power and data for a daisy chain of VP fixtures in a stage lighting environment or in a temporary event. One VP Power + Data Joiner can send power and data to no less than 65 VPL 1220-20 units at 230V. It includes a mounting plate for standardized touring clamps, and two slots in the sides for attaching a safety strap.

The VP Power + Data Joiner is a connection box with a VP female chassis connector, two True1 chassis connectors (Power in / Power thru), and one RJ45 chassis connector. This item must be installed before the first VP fixture in the cabled string and before the circuit breaker (for power) and VP Processor (for data). SGM always recommends to install a 10amp type B circuit breaker for each string of cabled VPL luminaires.

Did not find what you need? Send us an enquiry

_______________________________

Glossary: